熱電偶焊接機 - 達因國際實業有限公司

聯絡我們

達因全球首頁

English

即時連線數：9 次

「有毒氣體，振動，壓力，傾斜」雲平台租賃專案~

>> 客製化熱電偶 > 配件/控制箱

產品名稱：

熱電偶焊接機

產品型號：

TL-WELD9

點閱次數：

2102 次

影片展示：

說明：

熱電偶線焊接機TL-WELD9是專為焊接熱電偶線而設計，適合各類工程人員、實驗室、工廠企業及大量使用熱電偶線作感溫用途的客戶，設有安全焊接筆設計(不需要再使用鉗子)，無需任何培訓也可以輕易焊接出高質量的熱電偶線感溫點，輕便易於攜帶，只輕三個步驟，就可以焊接出令人滿意的感溫線，適合由0.1~1.1mm的線材，己被世界各地大型實驗寶採納使用中，提供全球快遞服務。
不需使用氬氣，只要3秒，即可焊接出商業等級的熱電偶線

*最先進設計, 操作快速方便,不需專業技術經驗.

*使用本焊接機可焊接出商業等級的Thermocouple接點.

*焊接只需幾秒鐘可快速完成

*適用 K / J/ E/ T/ N/ R/ S/ B 各型Thermocouple製造,修理.

*適用各種金屬線徑 AWG40-AWG19 (0.1~1.1mm) 線材焊接.

特色：

BEL Thermocouple Welder Model: TL-WELD9 is design for manufacturers and laboratory for the production of commercial grade thermocouple junctions, and for users of large numbers of exposed junction thermocouple such as test and development laboratories where multi point temperature sensing of test pieces is required. It has a safety welding pen design and do not need to use pliers any more. No special skills are needed and most people will be capable of producing quality work with minimal practice. The instrument can be operated via the front panel. It is portable welding machine that allow the thermocouple wires to bond into freestanding beads. Operator only takes a few seconds to bond the standard thermocouple wire into temperature sensors. This model is suitable for welding any type thermocouple wires from AWG40-AWG19 (0.1~1.1 mm) in diameter. A satisfactory thermocouple junction is produced without using argon, Just 3 steps you can weld a quality bonded thermocouple wire sensor. It has been selected by many famous laboratories in global. We Provide Global Speed Delivery Service.

規格：

Voltage Rating: 100~120V or 220~240V AC. (International Voltage)
Store Energy Output: 60 joules Max.
Cycle Time: Charging time at max. energy less than 3 sec.
Wire gauge:
LO : 40 ~30 AWG (0.1~0.3mm / 0.003”~0.012”)
MED: 30 ~24 AWG (0.3~0.5mm / 0.012” ~0.020”)
HI : 24 ~19 AWG (0.5~1.1mm / 0.020” ~ 0.043”)
Thermocouple Type: Suitable for type K / J/ E/ T/ N/ R/ S/ B
Weld cycle: Min 5 to 10 welds / min
Energy Controls: 3 position energy range switch
Energy Indicator: LED display to indicate charging status.
Circuit protect: Circuit protect by 5A breaker
Dimension: 220(W) x 120(H) x 200(D) mm
Weight: 5 KGS / 11 lbs
Suitable use for:
Laboratory / Engineering Dept. /Temperature Test / University / Research Center / Heating Company / Energy Company / Industrial Company / Manufacturer / Working Shop

應用：

Safety Welding Pen Design
For Type K/J/E/T/N/R/S/B wire in one machine
Wire Gauge from AWG40 ~ AWG19 (0.1mm~1.1mm)
High Quality Wire Bonded
Charging Time at Max Energy less than 3 seconds
3 Position Energy Range Selection (LO/MED/HI)
International Voltage Design
Used by many famous laboratories & manufacturer in global